Close fitting continuous single rail guard around top platform, extending down each side of stairway as short handrail.

• All classic models are fully welded throughout and available with ribbed rubber or anti slip threads.
• All colour finishes are hardwearing powder coated (red, light blue, white, grey, yellow, orange, green and sandstone)
• Fitted with dome covered spring loaded, 50mm dia swivel castors which retract when weight is applied to the steps, giving firm contact with the floor. Grey non marking tyres.

Threads - Average Working Height:
2 - 2.0m, 3 - 2.26m, 4 - 2.52m, 5 - 2.77m

These steps allow easy movement when pushed. The castors are spring loaded and retract when weight is applied to the step giving the non-slip base a firm grip to the floor.

• 410mm base x 415mm high x 280mm top
• Available in the following colours: black, red, blue, light grey & dark grey

Expamet threads and large working top platform makes them ideal for lading and unloading items outside.

• The steps have 2 handles at the front, fitted with knuckle guard hand grips for safe lifting and moving.
• 2 rear 200mm steel centred wheels with rubber tyres and roller bearings.

Threads - Average Working Height:
3 - 2250mm, 4 - 2500mm, 5 - 2750mm, 6 - 3000mm

Hand built with attention to detail, both in design and manufacture, to ensure total reliability and many years of arduous operation.

• Thread width 560mm. Platform W x D: 5-9 steps 560x380mm; 10-14 steps 560x460mm
• 560mm thread width
• Fitted with hand lock anchorage, when locked the front feet rest firmly on the floor, feet fitted with protective plastic floor pads
• Outboard axle mounted rear wheels gives extra stability
• Finish: all steel work is epoxy red
• Front 2 swivel castors with 100mm dia rubber tyred wheels, rear 2 axle mounted 200mm dia wheels with rubber tyres and roller bearings
• A caution notice is fitted to each set to remind user of operation procedure, a health and safety information sheet is also supplied
• Available in 5 to 20 treads including platform
• Available with ribbed rubber, punched, anti slip and aluminium threads

The steps are very popular for use where hygiene is essential. Particularly suitable for use within the food and chemical industry. Stainless steel thread have anti slip surfaces; resistant to water, oil and most chemicals.

• All steps units are fitted with 4 x 50mm dia spring loaded castors with grey non marking rubber tyres fitted in heavy zinc plated housing which retract when weight is applied to the steps, giving firm contact with the floor.
• Anti slip tread surfaces
• All mobile steps have handrail around three sides of the platform

Threads - Average Working Height:
3 - 2.26m, 4 - 2.52m, 5 - 2.77m